Knowledge
Knowledge /
What is a jawbreaker plate
2024-05-21
View：583
Back
Working Principle of Jaw Crusher
When working, the motor drives the belt and pulley, and the eccentric shaft makes the movable jaw move up and down, when the movable jaw rises, the angle between the elbow plate and the movable jaw becomes larger, which pushes the movable jaw plate to approach the fixed jaw plate, and at the same time, the material will be crushed or split, so as to achieve the purpose of crushing; when the movable jaw goes down, the angle between the elbow plate and the movable jaw becomes smaller, and the movable jaw plate leaves the fixed jaw plate under the action of the tie rod and the spring, and the crushed material discharges from the lower mouth of the crushing chamber. At this time, the crushed material is discharged from the lower opening of the crushing chamber. With the continuous rotation of the motor, the crusher moves the movable jaw in a cycle to crush and discharge the material, realizing mass production.
Warm Tips
The fasteners of each part of the machine should be carefully checked before use, especially the lubrication part and various bolts. Pay attention to the maintenance of fixed jaw plate, movable jaw plate, side guard plate and top class. Under the normal working condition, pay attention to the uniformity of the material, not once under the full, not to add when more, to avoid too much to cause the machine clogging.
When working, the motor drives the belt and pulley, and the eccentric shaft makes the movable jaw move up and down, when the movable jaw rises, the angle between the elbow plate and the movable jaw becomes larger, which pushes the movable jaw plate to approach the fixed jaw plate, and at the same time, the material will be crushed or split, so as to achieve the purpose of crushing; when the movable jaw goes down, the angle between the elbow plate and the movable jaw becomes smaller, and the movable jaw plate leaves the fixed jaw plate under the action of the tie rod and the spring, and the crushed material discharges from the lower mouth of the crushing chamber. At this time, the crushed material is discharged from the lower opening of the crushing chamber. With the continuous rotation of the motor, the crusher moves the movable jaw in a cycle to crush and discharge the material, realizing mass production.
Warm Tips
The fasteners of each part of the machine should be carefully checked before use, especially the lubrication part and various bolts. Pay attention to the maintenance of fixed jaw plate, movable jaw plate, side guard plate and top class. Under the normal working condition, pay attention to the uniformity of the material, not once under the full, not to add when more, to avoid too much to cause the machine clogging.
